Artistry

Designing Translucent Stone Walls: Light, Veining and Scale

Backlit translucent stone design: calculating LED diffuser depth, optimal color temperature (3000K-4000K), and slab thickness for glowing warmth.

Share this article:
sp-onyx-11-20220528-110708 — Gia công & Hoàn thiện đá hoa cương — Nhan Ban Stone

Contact our Hotline for direct consultation & factory quotation.

Call Now: 0909 929 904 Zalo: 0909 929 904
Published on

1. Problem to address

Backlit stone depends on natural transmission, slab thickness, fixture setback, heat management and the rear support system. Samples should be reviewed both unlit and illuminated to show the practical difference.

Translucent stone and lighting - Mirrored Onyx slabs
Onyx shows natural variation under backlighting.
Translucent stone and lighting - Golden Onyx slab
Golden Onyx changes under a rear light source.
Translucent stone and lighting - Backlit Onyx wall
Onyx feature wall with rear illumination.

2. Core criteria

  • Review transmission and veining on actual samples.
  • Agree fixture setback through a project-relevant sample where included.
  • Select a compatible light source and heat-management approach.
  • Plan access for drivers, power supplies and cables.
  • Select colour temperature after reviewing the sample under proposed lighting.

3. Coordination workflow

  1. Record the slab in ambient and illuminated conditions.
  2. Test a representative area only where included in scope.
  3. Adjust light spacing and diffusion based on the sample.
  4. Check framing, ventilation and cable routes against the documentation.
  5. Review the finished effect before packing within the agreed scope.

Structural design, site surveys and installation remain with the responsible project parties.

4. Limits and risks

  • Lights placed too close can create visible hotspots.
  • Natural stone will not transmit light as uniformly as an acrylic sheet.
  • Missing service access can complicate maintenance.
  • Inadequate heat management may affect bonding materials.

5. Pre-approval checklist

Confirm unlit and lit samples, setback, light source, heat management, service access, technical documentation and handover scope.

Discuss stone options

NHAN BAN STONE can compare design intent with available material, fabricate in the workshop, inspect and hand over within the agreed scope.

Technical Consultation & Quotation

Mr. Hải
Mr. Hải Consultant
090 992 9904 Chat on Zalo
Mr. Hoà
Mr. Hoà Consultant
090 365 5981 Chat on Zalo
Mr. Tín
Mr. Tín Consultant
097 958 7785 Chat on Zalo

More from Similar Topics

Heated discussion: You might want to know

FABRICATION & MATERIAL SPECIFICATIONS FAQ

Frequently Asked Questions

Verified details on workshop CNC fabrication, shop-drawing submission, and stone material parameters at NHAN BAN STONE.

01 What stone fabrication specifications does NHAN BAN STONE provide for serviced apartments and residential projects in HCMC?

NHAN BAN STONE supplies raw stone slabs and provides workshop-based precision fabrication according to approved technical drawings: bridge saw cutting, undermount/overmount sink cutouts, edge profiling, and 45-degree mitered joints for kitchen countertops, vanities, stairs, and thresholds. Customers or contractors provide itemized dimension drawings, and finished components are fabricated on laser bridge saws and CNC machinery for collection at our workshop (District 12) or curbside delivery. Our scope focuses strictly on factory fabrication; we do not provide on-site measurement, installation, or construction services.

02 Which stone surface is recommended for rental property countertops balancing long-term durability and budget?

For serviced apartments and rental units with frequent cooking, dense Natural Granite varieties (such as Indian Black, Black Galaxy, or Suoi Lau White) are commonly preferred for their surface hardness, thermal resistance against hot cookware, and stain resistance against household liquids. Natural stone exhibits inherent variation in veining and tonal shade across quarries; NHAN BAN STONE recommends inspecting current batch slab samples prior to finalizing fabrication orders.

03 What specifications should customers prepare to receive an itemized fabrication quotation?

To receive a precise estimate, please prepare: (1) Detailed dimension drawings or cutting schedules (length, width, thickness); (2) Required edge profiles (beveled, bullnose, mitered) and cutout locations; (3) Specified stone code or preferred aesthetic tone; (4) Total quantity and requested completion timeframe at the workshop.

04 How are fabricated stone pieces treated and inspected prior to dispatch?

Following precision cutting on infrared bridge saws and CNC machines, components are verified against drawing dimensional tolerances. Prior to dispatch, cut edges and faces receive surface sealing using dedicated penetrating sealers for natural stone. Sealer longevity depends on specific mineral characteristics and post-handover care (prolonged contact with harsh acidic cleaners should be avoided).

05 Where is the warehouse located and how can customers inspect physical slabs?

Slabs and sample batches can be inspected directly at the NHAN BAN STONE Warehouse & Workshop: 1765 National Highway 1A, Tan Thoi Hiep Ward, District 12, Ho Chi Minh City (Hours: Monday – Saturday, 07:00 – 17:00). Alternatively, technical drawings can be sent via WhatsApp/Zalo (+84 909 929 904) for material suitability advice.